Porter-Cable PIN138 23-Gauge 1-3/8-Inch Pin Nailer

Porter-Cable PIN138 23-Gauge 1-3/8-Inch Pin Nailer Review

Porter-Cable PIN138 23-Gauge 1-3/8-Inch Pin Nailer Feature

• Uses 23-gauge headless and slight head pin nails from 5/8-Inch to 1-3/8-Inch length
• Long life maintenance free motor to keep from staining the work surface
• Includes: nailer, 2000 pin nails of 3/4-Inch, 1/4-Inch plug with cap, wrench, and carrying case
• Consistent power and penetration to sink 1-3/8-Inch nail sub-flush into oak
• Tool automatically adjusts for different fastener lengths for easier loading and less problems with pins out of spec

The Porter-Cable maintenance-free 23GA 13/8'' Pin Nailer is finally
here! Perfect for professional and serious woodworkers alike, the PIN
138 delivers serious holding power while keeping nail visibility to a
minimum.

Fastens materials that would normally split using larger tools.
Will countersink 1-3/8" nails into hard materials like Oak.
Dual-stack ring system minimizes internal friction resulting in no maintenance yet longer life.


Rear exhaust directs potential moisture and contaminates away from the work surface.
Narrow nose gives you improved visibility.
Removable non-marring tip eliminates wood indentations.
Extra non-marring tip is included and stored in the tool.
Weighs just 2.2 pounds.
Aluminum body and magazine construction for durability.
Reversible belt clip lets you keep the tool by your side when not in use.
Excellent for small trim decorative moldings, cabinet crown molding, raised panel doors, rope and bead molding, mantle building, wood joining, as well as light fastening and clamping applications.


Specifications:
Magazine capacity: 130 pins.
Firing modes: Dual trigger feature.
Operating pressure: 60-100.
Fastener type: 23GA headless and slight head pin nails.
Fastener range: 5/8" to 1-3/8".
Height: 7-1/2".
Length: 9-1/2".
Weight: 2.2 lbs.

Bostitch PN50 Mini Impact Nailer

Bostitch PN50 Mini Impact Nailer Review

Bostitch PN50 Mini Impact Nailer Feature

• Rubber grip designed to insulate and reduce vibration
• Weighs only 1 lb.
• 360° swivel air fitting for maximum accessibility
• Front exhaust directs air away from users palm
• Drives most common bulk finish, framing & timber nails

Includes Mini Impact Nailer - PN50, 360 degree swivel air fitting

Cadex CB18.50 18 Gauge Brad Nailer, 3/4-Inch to 2-Inch

Cadex CB18.50 18 Gauge Brad Nailer, 3/4-Inch to 2-Inch Review

Cadex CB18.50 18 Gauge Brad Nailer, 3/4-Inch to 2-Inch Feature

• Accepts 18 gauge brads 3/4-Inch to 2-Inch in length
• Built in blow gun to remove debris
• Anti-dry fire mechanism
• No mar tip to protect finished work
• Adjustable depth of drive

From the makers of the extremely popular Cadex 23 gauge tools, we now offer the CADEX PROFESSIONAL DUTY 5/8" UP TO 2" 18 Gauge brad nailer. EVERYBODY makes brad nailers, so the folks at Cadex asked themselves how to set themselves apart a head above the competition, and here is how they did it!

• Begin with a quality tool manufacturer to start...all the bells and whistles mean nothing if the tool isn't up to the job
• The front nose IS the safety.  This unique design allows you to get into the tightest corner with the tip unlike most tools with a bulky safety that keeps you away.
• Anti dry fire mechanism, and a window in the side of the magazine to you can see when you are running low on brads
• Built in air duster/blow gun...now there's a handy extra! (you can see the mechanism just below the top of the tool body on the tool side).
• Adjustable depth control
• Rear exhaust
• Adjustable for both trigger and bump fire
• Very easy to clear jam mechanism 
• Swivel air plug - hose can rotate in all directions.
• No mar plastic tip, and a spare tucked away on the back of the magazine.
• Includes blow molded plastic case.
• Fit, finish, and overall quality which will exceed expectations
• Ideal for the contractor/cabinet builder etc - designed for commercial use.
• Uses standard 18 gauge brads
• Made in Taiwan - we'll be up front there.  As is the rest of the Cadex Line, most Bostitch, Porter Cable, Dewalt, Milwaukee, and others. 

This nailer is guaranteed to be free of defects in materials and workmanship for one year from date of purchase. 

 

 

Factory-Reconditioned Bostitch U/MFN200 Manual Flooring Cleat Nailer Kit

Factory-Reconditioned Bostitch U/MFN200 Manual Flooring Cleat Nailer Kit Review

Factory-Reconditioned Bostitch U/MFN200 Manual Flooring Cleat Nailer Kit Feature

• Reconditioned Bostitch Products have a One-year warranty through the Bostitch factory or an authorized service center
• Manual flooring mailer with 200-nail capacity magazine
• Light, easy-to-use nailer drives L-shaped cleats with a single blow; wide foot design
• Durable, lightweight aluminum; rubber bumper protects flooring
• Includes white-faced rubber mallet

This is a reconditioned power tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new condition. Some tools may contain cosmetic blemishes.

Ready to use straight out of the box, the Bostitch MFN200 factory-reconditioned 2-cleat manual flooring cleat nailer, comes along with a rubber mallet. Simply unpack, load, and strike to nail down and construct stable flooring. Ideal for the DIYer as well as the professional installer, this power cleat nailer drives 1-1/2- to 2-inch nails with minimal effort.

Gun it on hardwood or engineered floors and set the tongue-and-groove joint right for once and for all. The long-reach handle of this cleat nailer enhances the comfort. You need not bend every time to strike this nailer. The sturdy aluminum construction makes Bostitch MFN200 endure jobsite abuse. The Bostitch MFN200 assures a jam-free operation and lets you smoothly nail an L-shaped serrated nail at every strike. The rubber bumper prevents the flooring from any sort of damage, leaving it neat and spotless. With a magazine capacity of 200 cleats you are freed from the effort of frequent reloading. The 9.5-pound cleat nailer is lightweight, can be easily ported at the job site, and stably drives a nail through 3/4-inch hardwood flooring. Includes: MFN200 cleat nailer and rubber mallet.

Bostitch MIII812CNCT 9/16-to-2-1/4-Inch Industrial Concrete Nailer

Bostitch MIII812CNCT 9/16-to-2-1/4-Inch Industrial Concrete Nailer Review

Bostitch MIII812CNCT 9/16-to-2-1/4-Inch Industrial Concrete Nailer Feature

• Makes fastening of wood furring strips to concrete fast and easy
• One-hand operation for ease of use; high-capacity magazine reduces reload time
• Aluminum housing for job site durability
• High speed pneumatic power increases productivity over other fastening methods
• 7-Year warranty

Includes Industrial Concrete Nailer - U/MIII812CNCT

MAX NF255F/18 18 Gauge Brad Nailer

MAX NF255F/18 18 Gauge Brad Nailer Review

MAX NF255F/18 18 Gauge Brad Nailer Feature

• Switchable fire mechanism tool can be single or contact fire with a switch of a lever
• Weighs only 2.7 lbs, easy jam clear nose, comfortable rubber grip, rear air exhaust, dial adjustable depth control, low nail indicator on magazine, belt hook, no mar tip and carrying case
• Applications include door and window casing, cabinet assembly, finish work, case back, furniture assembly

Features a dial adjustable depth control, nail indicator on the magazine, easy jam clearance, switchable fire mechanism to go from single shot to contact fire. Can be used for finish work, cabinetry, door and window casing, paneling, flooring, furniture assembly and case back assembly. Specs: load capacity, 100 brad nails (drives 5/8" to 1-3/8" brad nails), operationg pressure is 70-100 PSI, air comsumption 0.020 ft 3 at 100 PSI operating pressuure, weighs 2.5 lbs, dimensions-8-3/4"Hx2-1/2"Wx9-1/2"L. Includes: no-mar contact tip, belt hook.

DEWALT DC608K 18-Volt 18-Gauge 2-Inch Brad Nailer Kit

DEWALT DC608K 18-Volt 18-Gauge 2-Inch Brad Nailer Kit Review

DEWALT DC608K 18-Volt 18-Gauge 2-Inch Brad Nailer Kit Feature

• Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints
• Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.
• Straight magazine, accepts 18 gauge nails ranging in legths from 5/8-inch to 2-inch
• Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches
• Part of the XRP DEWALT Cordless system; Contact Trip Lock-Off allows trigger to be disabled when not in use

Quality-designed tool works as fast as you do with consistent nail penetration. Features both sequential operating mode for precision placement and bump operating mode for production speed. Cordless: Yes, Volts: 18, Nail Diameter (gauge): 18, Nail Length (in.): 5/8in. to 2in., Magazine Capacity (qty.): 110, Jam Clearing: Yes, Tool Length (in.): 11 1/2, Tool Weight (lbs.): 7.4 lbs., Charger and Battery Included: Yes, Case Included: Yes

Senco RoofPro455XP Roofing Coil Nailer, Contact Actuation

Senco RoofPro455XP Roofing Coil Nailer, Contact Actuation Review

Senco RoofPro455XP Roofing Coil Nailer, Contact Actuation Feature

• Drives 11 gauge (.120") , full round head roofing nails 3/4" 1-3/4" smooth shank.
• 360 degree adjustable exhaust
• Includes Case
• Tool-free adjustable depth of drive for consistent and controllable nail set
• Adjustable nail canister accommodates entire range of true round-head roofing nails

XtremePro. Industrial quality. For use in asphalt and fiberglass shingles, waterproof tar paper, metal drip edges, insulative sheathing, cement board, and other re roofing applications. Dual action trigger. Adjustable shingle guide for consistent placement. Adjustable depth of drive. Operating pressure: 70 to 120 P.S.I. Nail capacity: 120. Weight: 5.4 lb. Accepts 3 4'' to 1 3 4'' coil roofing nails. Includes heavy duty case. Couplers not included.

Paslode T250A 16-Gauge Pneumatic Angled Finish Nailer no. 500910

Paslode T250A 16-Gauge Pneumatic Angled Finish Nailer no. 500910 Review

Paslode T250A 16-Gauge Pneumatic Angled Finish Nailer no. 500910 Feature

• Paslode 16-gauge Pneumatic Angled Trim Finish Nailer drives angled finish 1-1/4- to 2 1/2-Inch nails
• Use for baseboard and shoe molding, cabinetry, chair rails, crown molding, door and window casings, door jambs and stops, paneling, stair assemblies and Pick-up, and and service work
• Angled magazine allows the professional to reach tighter spots than with straight finish tools and easier access to corners
• Comfortable soft textured grip; comes with case
• Lightweight at 3.8-Pound; backed by 1-year manufacturers warranty

T250A-F16, 1-1/4' To 2-1/2', Pneumatic Angled Finish Gun Nailer, 16 Gauge, Angled Finish Nails, Comes With Rugged Plastic Carrying Case, Safety Glasses & Extra No-Mar Tip, This Paslode Finish Nailer Features A Tool Free Adjustable Depth Of Drive For Precise Control Of Nail Depth, No-Mar Tip To Protect Trim Surfaces & Finishes & New Compact Angled Magazine For Easier Access Into Hard To Reach Areas, Is Great For Door & Window Trim, Paneling, Baseboard, Casing, Crown Molding, Cabinetry & Door Jambs, Comes With Case, 1 Year Manufacturers Warranty.

Porter Cable PC3Pak Finish Nailer/Brad Nailer/Stapler Compressor Combo Kit

Porter Cable PC3Pak Finish Nailer/Brad Nailer/Stapler Compressor Combo Kit Review

Porter Cable PC3Pak Finish Nailer/Brad Nailer/Stapler Compressor Combo Kit Feature

• Innovative shroud allows for better protection and portability
• 150 psi max allows users to drive more nails than a traditional 135 max psi compressor
• 6 gal tank allows users to drive a large quantity of nails on a single tank charge
• 2.6 SCFM 90 psi allows for quick compressor recovery time
• 2.6 SCFM 90 psi allows for quick compressor recovery time, per ISO1217; 34 lbs weight allows compressor to be easily carried

Porter Cable’s PC3PAK combo kit comes equipped with the FN250C 16-gauge finish nailer, the BN138 narrow-crown brad nailer, the NS100B 18-gauge crown stapler, and the 6-gallon pancake compressor--providing a well-rounded tool kit ideal for installing crown molding, chair rails, base cap molding, wood casing, and more. Complete with hose, nails, staples and a carrying bag, the PC3PAK serves as a convenient kit for the next remodeling, repair, or workshop project.

PC3Pak Finish Nailer/Brad Nailer/Stapler Compressor Combo Kit At a Glance: Compressor’s 34-pound weight allows for easy portability Maintenance-free compressor pump for convenient operation Nailers’ and stapler’s maintenance-free motors designed to deliver long life Internal piston catches for maximum power on every shot Nailers feature tool-free jam release mechanisms for easy nail removal

The PC3PAK’s sturdy and lightweight compressor makes it easy to transport to various project sites. View larger

Compressor
The 150 psi max compressor stores more air than traditional 135 psi compressors, increasing productivity by allowing for more nails to be driven. Its 6-gallon tank also improves upon the quantity of nails that can be deployed on a single tank charge. A standard household current supports this 120-volt electric unit, and its innovative shroud and 34-pound weight advances protection and portability.

Nailers and Stapler
The FN250C finish nailer utilizes standard 16-gauge finish nails from 1 inch to 2-1/2 inches long, and it features an internal piston catch for consistent maximum power on every shot and a rear exhaust to keep contaminates away from work. Its oil- and maintenance-free motor prevents oil from staining the work surface and extends tool life. The BN138 narrow-crown brad nailer uses standard 18-gauge brad nails from 5/8 inches to 1-3/8 inches long. It too comes with a long-life motor, and it has a tool-free depth-of-drive adjustment with detents for proper setting of nail heads (as does the FN250C). And the NS100B stapler dispenses standard 18-gauge 1/4-inch staples from 1/2 inch to 1 inch long. Like the nailers, the stapler also features an internal piston catch; additionally, it has a split-nose design for easy removal of jammed staples, a sequential-style trigger with lock-off switch, and a removable non-marring nose tip.

What's in the Box
6-gallon, 150 psi compressor; 16-gallon 2-1/2 inch finish nailer; 18-gallon 1-3/8 inch brad nailer; 18-gallon 1-inch stapler (1/4-inch crown); 25 feet of 1/4-inch air hose with a coupler and plug; 500 finish nails of 2-inch length; 500 brad nails of 1-1/4 inch length; 500 staples of 1-inch length; carrying bag.

The PC3PAK includes the BN138 narrow-crown brad nailer, the FN250C finish nailer, and the NS100B stapler. (Click each to enlarge)

Includes 6 Gallon, 150 PSI Pancake Compressor, 1-3/8-in 18-Gauge Brad Nailer - BN138, 2-1/2-in 16-Gauge Finish Nailer - FN250C, 1-in Narrow Crown Stapler - NS100B, 25' Air Hose w/ Coupler & Plug, (500) 2-in Finish Nails, (500) 1-1/4-in Brad Nails, (500) 1-in Staples, Canvas Carry Bag, Operating Manuals

Paslode 902000 16 Gauge Straight Finish Nailer

Paslode 902000 16 Gauge Straight Finish Nailer Review

Paslode 902000 16 Gauge Straight Finish Nailer Feature

• Quick-clear nose cover for quickly clearing jams
• Comfortable in Sure Grip-inch handle for optimal comfort and control
• Compact and lightweight (just 4.75 pounds) for easy handling
• Shoots 3/4- to 2-1/2-inch nails for a wide variety of finish nailing applications
• Tool-free depth of drive for less downtime and precise nailing

Ideal for professional remodelers, carpenters, and contractors, the Paslode 902000 Fuel-Powered Cordless 16-Gauge Straight Finish Nailer boasts an open line of sight, so you can fasten any molding with precision. And with no cords, hoses, or compressors to drag around, you'll save time and get powerful, precise performance everywhere you take this must-have tool.

The 902000 Cordless Straight Finish Nailer At a Glance: Cordless, lightweight mobility; no hoses or compressor Drives 3/4" to 2-1/2" nails into tough lumber No-mar tip protects wood Tool-free depth adjustment Includes carrying case, rechargeable battery, battery charger, extra no-mar tips, and more 1-year limited warranty

Cordless mobility saves you time and energy.

Includes storage case, battery charger, battery, safety glasses, and more.

Cordless Design for Flexibility on the Job
With the 902000 Fuel-Powered Cordless 16-Gauge Straight Finish Nailer, you'll never have to worry about dragging around annoying cords, dirty hoses, or bulky compressors. Instead, you'll get the portability and flexibility you need to move around the jobsite and finish hard-to-reach areas--without the mess and clutter of a pneumatic tool. And because you won't need to set up or break down, you'll save both time and labor costs.

Power and Precision for a Professional Finish
Ideal for professionals and remodeling enthusiasts, the powerful 902000 Fuel-Powered Cordless 16-Gauge Straight Finish Nailer drives 3/4" to 2-1/2" 16-gauge straight nails in even the hardest woods, so you can finish doors, molding, paneling, rails, casing, cabinetry, pick up work, service work, and more. And when you're tackling a big job, you'll be grateful for the high-capacity straight-collation magazine, which holds up to 100 nails (two strips).

What's more, this nailer features an open line of sight, no-mar tip, and tool-free adjustable depth-of-drive to minimize workpiece damage and ensure precise nail placement. For further ease of use, the 902000 provides consistent drive energy in all types of wood, features a 10-nail lockout that prevents blank firing, and comes with a quick-clear nose cover that clears jams in an instant.

Big Power in a Compact Package
The 902000 Straight Finish Nailer uses a patented fuel-plus-battery system to give you exceptional power and performance. The included rechargeable battery will drive 4,000 nails on one charge, while one Short Yellow Trim Fuel Cell (not included) will drive a total of 1,200 nails.

Compact and well-balanced, the 902000 weighs just 4.9 pounds (with battery), so it's easy on the arms. And with a sure-grip handle, it's comfortable to hold, even during all-day jobs. For easy mobility, the 902000 features a reversible belt hook that can be adjusted for right-handed and left-handed use. The belt hook is also great for hanging the 902000 on a ladder when you need both of your hands.

The 902000 is backed by a 90-day normal-wear parts warranty and a one-year limited warranty.

About Paslode: Providing Professionals with Innovative Solutions
With more than 70 years of experience, Paslode provides the standard by which other pneumatic and cordless fastening systems are measured. With its goal to provide professional users with high-quality fasteners and fastening tools, Paslode has achieved many industry firsts and innovations, including powerful tools that drive through the toughest woods--even LVL--and fuel-cell batteries that save time and energy.

What's in the Box
Nailer; rechargeable battery; two-hour AC battery charger; rugged case with storage compartments for fuel and fasteners; extra no-mar tips; clear safety glasses; manual; quick reference set-up; and cleaning guide.

Factory-Reconditioned Bostitch U/BT1855K 18-Gauge Brad Nailer

Factory-Reconditioned Bostitch U/BT1855K 18-Gauge Brad Nailer Review

Factory-Reconditioned Bostitch U/BT1855K 18-Gauge Brad Nailer Feature

• Oil-free engine: requires no daily maintenance and eliminates risk of oil stains on work surfaces
• Selectable trigger system: easy conversion between sequential or contact modes. Trigger lockout mode for use when working in occupied spaces
• Dial-A-Depth control: quickly and conveniently set fasteners to desired depths
• Swivel air fitting: increased maneuverability, filtered air inlet for improved engine durability
• Reversible belt hook: with integrated pencil sharpener for ultimate convenience

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 18-Gauge Brad Nailer - BT1855K-R, 1/4-in swivel air fitting, Hex wrench, Carry case, Belt Hook

Bostitch MIIIFN 1-1/2- to 2-Inch Pneumatic Flooring Nailer

Bostitch MIIIFN 1-1/2- to 2-Inch Pneumatic Flooring Nailer Review

Bostitch MIIIFN 1-1/2- to 2-Inch Pneumatic Flooring Nailer Feature

• 1-1/2-inch to 2-inch pneumatic flooring nailer for driving L-shaped flooring cleats
• High-speed; extra-wide composite base; high-capacity magazine; 420 inch-pounds of driving power
• Constructed of aircraft-grade aluminum
• Includes rubber-tipped mallet
• 17-1/4 by 3-1/8 by 11-1/2; 11.2 pounds; 7-year limited warranty

The Bostitch MIIIFN Pneumatic Flooring Cleat Nailer lets you create professional-looking floors quickly and comfortably. Its high-speed pneumatic operation rapidly drives nails into both unfinished and pre-finished hardwood flooring, and its long-grip handle allows you to maintain a comfortable posture when working. Tackling prefinished flooring is no problem with the included adapter foot and the extra-wide base plates that drive staples exactly where you want them.

The Bostitch Pneumatic Flooring Cleat Nailer At a Glance: 420 in./lbs. of driving power High-speed, mallet-actuated operation Extra-wide base plate for stability and control Ergonomic design with elongated handle

1.5" to 2.0" L-shaped cleats are ideal for installing hardwood flooring. View larger.

Adaptor foot and FloorGuard graphite mallet provide stability and control. View larger.

Interchangeable base plates help you drive cleats at the proper angle and depth. View larger.

All the Power You Need to Get Jobs Done Quickly
Harness the power of compressed air and complete your flooring jobs quickly and easily. Just connect the Bostitch MIIIFN Pneumatic Flooring Cleat Nailer to your air compressor for 420 in/lbs of impact at 70-120 PSI. A manual strike will activate the firing action with a lightweight FloorGuard graphite mallet, and a 110-cleat magazine will keep you working without interruption.

Comfortable Design Keeps You in Control
Ergonomically designed for ease of use, the MIIIFN features an elongated handle that lets you work in a natural, comfortable position. For control, the extra-wide 1/2- and 3/4-inch interchangeable base plates sit flush against floor boards for stability, so you can drive cleats at the proper angle and depth every time. Additionally, a pre-finished floorboard adapter foot won't scuff or scratch floors during installation for a professional-grade look.

Lightweight, Durable Construction for Everyday Use
The MIIIFN Pneumatic Flooring Cleat Nailer's lightweight body and graphite FloorGuard mallet make this tool comfortable enough to wield all day without fatigue. Built for durability, this nailer will withstand the wear and tear of any jobsite.

The Bostitch MIIFN Pneumatic Flooring Cleat Nailer measures 3.13 x 11.5 x 17.25 inches (WxHxL) and weighs 11.2 pounds. It is covered by a seven-year limited warranty.

About Bostitch
Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.

What's in the Box
Cleat nailer, FloorGuard graphite mallet, pre-finished-flooring adapter foot, and two base plates (1/2 inch and 3/4 inch).