Bostitch RN45B RidgeRunner Rebuild Repair Kit

Bostitch RN45B RidgeRunner Rebuild Repair Kit Review

Bostitch RN45B RidgeRunner Rebuild Repair Kit Feature

• All of the O`rings in the Tool
• Cap Gasket Part#100212
• Piston Stop Bumper Part#T55050
• Cylinder Seal Part#T60006
• 2ea Check Seal Part#T60021

Bostitch RN45B Ridge Runner Coil Roofing Nailer O`ring, Seal, Feeder Spring & Exhaust Bumper, Feeder Bumper Repair Rebuild Kit

2-in-1 Combination Air Floor Nailer/Stapler (Includes with goggles, hex wrenches, air tool oil, spacers, and screws)

2-in-1 Combination Air Floor Nailer/Stapler (Includes with goggles, hex wrenches, air tool oil, spacers, and screws) Review

2-in-1 Combination Air Floor Nailer/Stapler (Includes with goggles, hex wrenches, air tool oil, spacers, and screws) Feature

• Uses cleat nails 1-1/2" long to 2" long or floor staples 1" to 2"
• 80 staple, 100 cleat magazine capacity, top loading
• Rubber face slug hammer
• 90 PSI
• Comes with goggles, hex wrenches, air tool oil, spacers, and screws

Install hardwood floors gymnasium-tight. Prevents hammer marks. Designed for 1/2" to 3/4" floor panels. Comes with goggles, hex wrenches, air tool oil, spacers, and screws Air inlet diameter: 1/4" - 18 NPT Overall dimensions: 17-7/8" L x 3-1/16" W x 22-5/8" H Weight: 16.06 lbs.

Pneumatic Screw Gun

Pneumatic Screw Gun Review

Gun is a semi-automatic installation tool that dramatically increases the speed of the already quick installation of the TC-G (TC-150) fasteners and pre-grooved decking or non-grooved decking with the TC-G (TC-150) Slot Cutter. The fasteners is slipped into the unique nose of the gun and then placed into the board groove. The installation gun installs the fastener to the board with a collated pneumatic screw. The screw drives in like a nail and can be removed like a screw.

Spot Nails WS4840W2 18 Gauge Flooring Stapler

Spot Nails WS4840W2 18 Gauge Flooring Stapler Review

Spot Nails WS4840W2 18 Gauge Flooring Stapler Feature

• Hardwood Flooring Nailer
• 3/8-Inch, 1/2-Inch and 9/16-Inch engineered hardwood floors
• 168 staple capacity
• Use with 4811PN staples
• Adjustable Exhaust

ITEM SPECIFICATIONS --- Gauge: 18 --- Crown: 1/4" --- Magazine Capacity: 168 Staples --- Operating Air Pressure: 80-110 psi --- Length: 12" --- Height: 9-1/2" --- Length: 12" --- Width: 2-1/2" --- Weight: 4 lbs. 9 oz.

Driver Piston Kit, #20 For OFN2890

Driver Piston Kit, #20 For OFN2890 Review

Driver Piston Kit, #20 For OFN2890 Feature

• Vulcan #20 Driver Piston Kit 839-8224 0FN2890ORK
• SUPERIOR AIRCO WHLSE

For Superior Airco finishing nailer model # OFN2890 (Aubuchon Item # 633160).

PINs.100 23 Ga. X 1" Pin Nails (2,000 Pk)

PINs.100 23 Ga. X 1" Pin Nails (2,000 Pk) Review

PINs.100 23 Ga. X 1" Pin Nails (2,000 Pk) Feature

• 1" Length
• 23 Gauge
• Pin Nails
• 2000 per Package

Fits PORTER CABLE Pin100 and other 23 Guage pin nailers

Superior Parts SP 874-436 Aftermarket O-RING (P-4) for Hitachi NR83A/AA NV83A

Superior Parts SP 874-436 Aftermarket O-RING (P-4) for Hitachi NR83A/AA NV83A Review

Superior Parts SP 874-436 Aftermarket O-RING (P-4) for Hitachi NR83A/AA NV83A Feature

• Fits: NR83A/AA NV83A

Aftermarket O-RING (P-4) for Hitachi NR83A/AA NV83A.

Porta-Nails Porta Nailer Pro Kit Nailer #411

Porta-Nails Porta Nailer Pro Kit Nailer #411 Review

Porta-Nails Porta Nailer Pro Kit Nailer #411 Feature

• Ratcheting ram allows for single or multi-hit guaranteeing nails T or L are properly set every time
• Includes Sturdy Carrying Case.
• Magazine accommodates both T and L style 16 Ga flooring nails.
• New robust design incorporates an integrated magazine which maintains constant
• Shoe Base System Improves tool balance when nailing by resting on the subfloor.

Use both T and L style 16ga flooring nails; Ratcheting ram allows for single or multi hit; New design uses a modern bypass pusher; Nailer shoe position in front of the flooring tongue; Improves tool balance by resting tool on the sub-floor; Contractor grade and DIY friendly; Lightweight and easy to use

Stanley Bostitch 16Ga Finish Nailer Kit Fn1664k Power & Air Hammers/Nailers

Stanley Bostitch 16Ga Finish Nailer Kit Fn1664k Power & Air Hammers/Nailers Review

16 Gauge Finish Nailer Kit, Drives 16 Gauge Finish Nails From 1' To 2-1/2', Features Oil Free Operation, Selectable Trigger System, Low Nail Lockout, Belt Hook, Quick Release Nosepiece, Ultra Quiet Rear Exhaust, Dial A Depth Control, Includes Finish Nailer, 1/4' Swivel Air Fitting, (1000) 2' Finish Nails, 4 Profile Tips, Carrying Case & Belt Hook.

Porter-Cable CFFN250N 16-Gauge Finish Nailer 18-Gauge Brad Nailer Compressor Combo Kit

Porter-Cable CFFN250N 16-Gauge Finish Nailer 18-Gauge Brad Nailer Compressor Combo Kit Review

To be honest, we looked twice at the price, certain the folks at Amazon had made a mistake. But sure enough, they're right--and so is the price. Porter-Cable makes some of the best pneumatic tools in the industry, and these nailers are two prime examples. The 16-gauge is sturdy, compact, lighter and quieter than you'd expect with a grip even smaller hands can get around. Great balance, easy depth-of-drive adjustment, and a pleasure to use. Similarly, the 18-gauge is light but rugged, comfortable and maneuverable, even in awkward places or after long runs. Some other features we like: a special hardened driver blade, a sequential fire trigger, a visual reload indicator, a safety located behind the driver guide for driving brads in tight spaces and an easy-to-adjust depth guide. Both guns have directional exhausts, too. The pancake-style compressor has a six-gallon tank and easily runs both guns at the same time. It's light, portable and doesn't want much from you in terms of maintenance--it's oil-free and Teflon-coated. Some other reasons to like it: a high-flow regulator, an easy-to-read air pressure gauge, automatic thermal overload protection, an industrial-style quick-connect body in the air outlet, and a long-life motor with replaceable brushes. We can't imagine this deal will be around forever.--Kris Jensen-Van Heste

SoloSider Siding Tools For Fiber Cement Siding And LP Smartside 3/8, Fully Adjustable Siding Gauges

SoloSider Siding Tools For Fiber Cement Siding And LP Smartside 3/8, Fully Adjustable Siding Gauges Review

SoloSider Siding Tools For Fiber Cement Siding And LP Smartside 3/8, Fully Adjustable Siding Gauges Feature

• If you need help on this tool please call 541-247-8306. Click on the SoloSider LLC link for info.
• Adjust siding up or down in 1/16 increments while on the SoloSiders
• Easily dial out any accumulated error caused by off size boards
• Unlike our competition, these tools will not break when dropped from any height.
• Will do a reveal as small as 3-1/2 inches using the correct size plank.

100% made in the U.S.A. Patent #7,213,346. The price is for one pair. The main body is 17-7 PH stainless steel, heat treated to a spring temper and nickel plated. All of the molded parts are an engineering grade glass filled nylon. These tools will not scratch prefinished siding. The SoloSiders are the only tools on the market that allow you to change the overlap dimension in real time. When you side a house, one of the most important aspects is to line up the siding evenly with the bottoms and and hopefuly the tops of the windows. If you don't manage to do this then the job doesn't look right. The pros actually vary the overlap to attain this. The only way you can do this with a siding installation tool (whether it works from the top or bottom) it has to be able to change the overlap dimension. You cannot use less than 1-1/4 overlap on fiber cement siding which is code minimum, but you can sure use more, and should. When using to install LP Smartside 3/8 thick, one inch is the minimum overlap, which this tool does. We provide overlap charts with these tools for every width of siding and in 1/16 increments. Go to solosider to see a instructional video. We ship via the USPS Priority mail, which usually takes about 2 days. If you wish to use another service give us a call.

Bostitch F21PL Round Head 1-1/2-Inch to 3-1/2-Inch Framing Nailer with Positive Placement Tip and Magnesium Housing

Bostitch F21PL Round Head 1-1/2-Inch to 3-1/2-Inch Framing Nailer with Positive Placement Tip and Magnesium Housing Review

Bostitch F21PL Round Head 1-1/2-Inch to 3-1/2-Inch Framing Nailer with Positive Placement Tip and Magnesium Housing Feature

• 1-1/2-inch to 3-1/2-inch framing nailer; 1,050 inch-pounds of driving power; sequential and bump trigger
• 2 nailers in one: includes two quick-change nosepieces, converts to framing or metal connector applications
• Lightweight magnesium housing; integrated rubber skid pads; rubber grip
• Includes 1 framing nailer
• 14-1/4 by 20-1/2 inches; 8.1 pounds; 7-year limited warranty

The Bostitch F21PL Round-Head Framing Nailer is the ideal tool for framing, sheathing, subflooring, and bracing jobs. Perfect for professionals and weekend warriors alike, this nailer features a strong, lightweight magnesium body, quick-change nosepieces for plastic-collated and metal-connector nails, a 16-inch layout indicator, and more.

The Bostitch F21PL Round-Head Framing Nailer At a Glance: 1,050 in./lbs. of driving power Quick-change nosepieces for framing and metal connector nails Patented push-button adjustable nail depth Recommended for use with HurriQuake nails

Unbeatable power-to-weight ratio helps you complete all-day jobs. View larger.

2.0" to 3.5" 21-degree nails are ideal for framing jobs.

Designed to Match the Task at Hand
The recommended tool for use with HurriQuake disaster-resistant nails, the F21Pl has a patented feature that lets you set nail depth with the simple push of a button. For further convenience, quick-change nosepieces let you switch from plastic-collated framing nails to metal connector nails in seconds.

The high-capacity magazine holds up to 60 plastic collated 21-degree framing nails (2.0-3.5 inch) or 60 metal connector nails (1.5-2.5 inch). Its 16-inch layout indicator, located on the magazine, lets you know at a glance the correct distance between studs.

And with an adjustable rafter hook, you can conveniently hang the nailer on joists and rafters during work breaks.

Best-in-Class Power-to-Weight Ratio
The magnesium construction of the F21PL Round-Head Framing Nailer means this tool is light enough to use all day, while still being strong enough to reliably use again and again. It also means that this tool has the best power-to-weight ratio in its class: 1,050 in./lbs. to 8.1 pounds.

The Bostitch F21PL Round Head Framing Nailer works with a standard air compressor and is backed by a seven-year limited warranty.

About Bostitch
Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.

What's in the Box
Framing nailer and two quick-change nosepieces.

Magnesium plastic collated framing nailer / metal connector nailer. This new framing nailer drives 1-1/2- to 3-1/2-inch framing nails and comes with an interchangeable tip for placing nails accurately for metal connector applications. You get the benefit of two tools in one, no other competitive framer can match that. This light weight tool is also one of the most powerful framers with 1050 in./lbs. of driving power. It is able to tackle even tough engineered lumber applications. Tool also includes bolt on steel wear guards with integrated rubber skid pads, and printed magazine with scale and 16-inches-on-center layout feature. New smart trigger works as a sequential and bump fire trigger base on how you actuate the tool.

Ridgid R350RHA 3-1/2-Inch Round Head Framing Nailer

Ridgid R350RHA 3-1/2-Inch Round Head Framing Nailer Review

Ridgid R350RHA 3-1/2-Inch Round Head Framing Nailer Feature

• Powerful motor
• Rear loading magazine with by-pass pusher
• Magazine adjustment for larger diameter nails
• Dry-fire lockout feature
• Aggressive "toe-nailing" claw

Includes 3-1/2-in Round Head Framing Nailer - ZRR350RHA, Wrench, Eye Protection, Oil, Carrying Bag With Shoulder Strap

Driver Piston Kit, #19 For OJUF1890

Driver Piston Kit, #19 For OJUF1890 Review

Driver Piston Kit, #19 For OJUF1890 Feature

• Vulcan #19 Driver Piston Kit 404-7791 OJUF1890ORK
• SUPERIOR AIRCO WHLSE

For Superior Airco finishing nailer model # OJUF1890 (Aubuchon Item # 634903).

BOSTITCH KIT,O-RING N80/N90 Model ORK11

BOSTITCH KIT,O-RING N80/N90 Model ORK11 Review

BOSTITCH KIT,O-RING N80/N90 Model ORK11 Feature

• KIT,O-RING N80/N90 Model ORK11
• 1 per carton

Includes O-Ring Repair Kit - ORK11, Lubricant